All Topics

How to Install the AC Wallbox with Socket — Current Shipping Version (7–22 kW)

Last updated Aug 18, 2026

This procedure applies to the current shipping version of the dé AC Wallbox with Socket in 7 kW, 11 kW and 22 kW versions. Mount the supplied wall bracket, hang the charging station securely, connect its power input, and adjust the settings before connecting the vehicle.

Important: A Type 2 charging cable is not included. You need a separate Type 2 cable to connect the Wallbox socket to your vehicle.

Check the power input version

The first connection step depends on the power input supplied with your Wallbox.

Power input Connection step
CEE connector Plug in the CEE connector.
Bare inlet cable Connect the charging station’s inlet cable to the meter box.

Complete the wall-mounting steps below before preparing the Wallbox for charging.

Mount the Wallbox

1. Prepare the wall bracket

Position the wall mount bracket and tighten its screws as shown. Use the mounting points on the bracket to identify where the holes must be drilled.

2. Drill the mounting holes and secure the bracket

Drill the holes according to the wall mount bracket. Insert and tighten the screws to fix the bracket to the wall.

Preparing and securing the AC Wallbox wall mount bracket
Use the wall mount bracket to position the holes, then tighten the mounting screws.

3. Check the wall bracket

Check that the bracket is securely fastened and does not wobble. Do not hang the charging station if the bracket moves.

4. Hang the charging station

Align the holes on the rear of the charging station with the screws on the wall bracket. Carefully lower the charging station onto the bracket.

Check that the Wallbox is seated correctly and remains securely supported by the bracket.

Aligning the rear holes of the AC Wallbox with the wall bracket screws
Align the rear mounting holes with the bracket screws and hang the Wallbox.

5. Add the optional securing screws

If you choose to use the additional securing points, drill the required holes and tighten the screws to secure the charging station.

Optional screw positions for securing the AC Wallbox
Use the additional screw positions if you want to secure the Wallbox further.

Connect the power input

Complete the connection that matches your product version:

  • CEE connector version: Plug in the CEE connector.
  • Bare inlet cable version: Connect the charging station’s inlet cable to the meter box.

Prepare the Wallbox for charging

  1. Adjust the charging current and delay-time settings.
  2. Connect one end of your separate Type 2 charging cable to the Wallbox socket.
  3. Connect the other end of the Type 2 cable to the vehicle’s charging port.

Important: The current and delay-time settings cannot be changed after the Type 2 connector has been plugged into the vehicle’s charging port. Complete the settings before connecting the vehicle.

For help identifying the controls, see Charger Screen and Button Functions Explained.

If you cannot complete the installation

If the wall bracket wobbles, the charging station cannot be seated correctly, or you cannot complete the power connection, stop and contact support@depow.com. Include your power version, power input type, order information and clear photos of the issue.